LFP_48V_mBMS_FW/APP_R3221/App/Hardware/malloc.c

/**
  ******************************************************************************
  * File Name          : can_comm.c
  * Description        : This file provides code for the configuration
  *                      of the CAN communication instances.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under Ultimate Liberty license
  * SLA0044, the "License"; You may not use this file except in compliance with
  * the License. You may obtain a copy of the License at:
  *                             www.st.com/SLA0044
  *
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "malloc.h"

//Memory pool (4-byte alignment)
__align(4) uint8_t membase[MEM_MAX_SIZE]; // __attribute__((at(0x10000000))); //CMM within the memory pool

//Memory management tables
__align(4) uint16_t memmapbase[MEM_ALLOC_TABLE_SIZE]; // __attribute__((at(0X10000000 + MEM3_MAX_SIZE)));	//Internal CCM pools MAP

//Memory management parameters	   
const uint32_t memtblsize = MEM_ALLOC_TABLE_SIZE;		//Memory table size
const uint32_t memblksize = MEM_BLOCK_SIZE;					//Memory block size
const uint32_t memsize = MEM_MAX_SIZE;						//Total memory size

//Memory management controller
struct _m_mallco_dev mallco_dev =
{
	mymem_init,							//Memory initialization
	mem_perused,						//Memory usage
	membase,								//Memory pool
	memmapbase,						//Memory management tables
	0,  		 								//Memory management is not ready
};

//Copy memory
//*des:Destination address
//*src:Source address
//n:Need to copy memory length (bytes)
void mymemcpy(void *des,void *src,uint32_t n)
{
	uint8_t *xdes = des;
	uint8_t *xsrc = src;
	while(n--) *xdes++ = *xsrc++;
}

//Setting memory
//*s:Memory address
//c :The value to be set
//count:Need to set the memory size(Bytes)
void mymemset(void*s,uint8_t c,uint32_t count)
{
	uint8_t *xs = s;
	while(count--) *xs++=c;
}

//Memory management class  
//memx:Belongs to a block of memory
void mymem_init(void)
{
	mymemset(mallco_dev.memmap, 0, memtblsize * 2); 	// Memory status table is cleared to zero
	mymemset(mallco_dev.membase, 0, memsize);					// Memory pool all data to zero  
	mallco_dev.memrdy = 1;														// Memory initialized OK  
}

//Get memory usage
//memx:Belongs to a block of memory
//Return value: usage (0~100)
uint8_t mem_perused(void)  
{  
	uint32_t used = 0;  
	uint32_t i;  
	for (i = 0; i < memtblsize; i++)  
	{  
		if (mallco_dev.memmap[i]) used++; 
	} 
	return (used * 100) / (memtblsize);  
} 

// Memory allocation (internal call)
// size:Amount of memory to allocate (in bytes)
// The return value:0XFFFFFFFF,To indicate an error; the other, the memory offset
uint32_t _mem_malloc(uint32_t size)  
{  
	signed long offset = 0;  
	uint16_t nmemb;						// Required number of memory blocks  
	uint16_t cmemb = 0;				// Number of contiguous blocks of free memory
	uint32_t i; 

	if (!mallco_dev.memrdy) mallco_dev.init();		// Is not initialized, perform the initialization
	if (size == 0) return 0XFFFFFFFF;							// Do not need to allocate
	nmemb = size / memblksize;  									// Gets the required number of contiguous blocks of memory allocated
	if (size % memblksize) nmemb++;  
	for (offset = memtblsize - 1; offset >= 0; offset--)	// Search the entire memory control  
	{     
		if (!mallco_dev.memmap[offset]) cmemb++;		// Increase the number of contiguous blocks of free memory
		else cmemb = 0;															// Contiguous blocks of memory to zero
		if (cmemb == nmemb)													// Find nmemb consecutive empty memory blocks
		{
			for (i = 0; i < nmemb; i++)  							// Mark a block of memory is not empty 
			{  
				mallco_dev.memmap[offset+i] = nmemb;  
			}  
			return (offset*memblksize);								// Returns the offset address  
		}
	}  
	return 0XFFFFFFFF;				// Not found consistent with allocated memory block  
}  

//Free memory (internal call)
//offset:Memory address of offset
//Return values: 0, release success; 1, release failed;
uint8_t _mem_free(uint32_t offset)  
{  
	int i;  
	
  if (!mallco_dev.memrdy)			// Is not initialized, perform the initialization
	{
		mallco_dev.init();    
    return 1;									// Not initialized  
  }  
  if (offset < memsize)				// Offset within the memory pool. 
  {  
		int index = offset / memblksize;						// Offset where the memory block number  
    int nmemb=mallco_dev.memmap[index];					// Number of memory blocks
    for (i = 0; i < nmemb; i++)  								// Zero out memory blocks
    {  
			mallco_dev.memmap[index+i] = 0;  
    }  
    return 0;  
  } else return 2;						// Offset Super.  
}  

//Free memory (external call)
//ptr:Memory address 
void myfree(void *ptr)  
{  
	uint32_t offset;  
	
	if (ptr == NULL) return;		// Address 0.  
 	offset = (uint32_t)ptr - (uint32_t)mallco_dev.membase;  
	_mem_free(offset);					//Free up memory     
}  

//Allocating memory(External call)
//size:Memory size (in bytes)
//Return values: the first address of the allocated memory.
void *mymalloc(uint32_t size)  
{  
  uint32_t offset;  
	
	offset = _mem_malloc(size);  	   				   
  if (offset == 0XFFFFFFFF) return NULL;  
  else return (void*)((uint32_t)mallco_dev.membase + offset);  
}  

//Reallocating memory (external call)
//*ptr:The old memory address
//size:Amount of memory to allocate (in bytes)
//Return values: the first address of the newly allocated memory.
void *myrealloc(void *ptr,uint32_t size)  
{  
    uint32_t offset;  
    offset = _mem_malloc(size);  
    if (offset == 0XFFFFFFFF) return NULL;     
    else  
    {  									   
	    mymemcpy((void*)((uint32_t)mallco_dev.membase + offset), ptr, size);	// Copy the old memory contents to the new memory   
			myfree(ptr);  											  																// Free old memory
			return (void*)((uint32_t)mallco_dev.membase + offset);  							// Returns a new memory address
    }  
}