#include "led.h"
//////////////////////////////////////////////////////////////////////////////////	 
//This program is for educational purposes only, without the author's permission, may not be used for any other purpose
//ALIENTEK STM32F407 Development Board
//LED driver code	   
//Hot Atomic @ALIENTEK
//Forum: www.openedv.com
//Date created: 2014/6/10
//Version: V1.0
//All rights reserved pirated reserved.
//Copyright(C) Guangzhou wing electronic technology limited company 2014-2024
//All rights reserved									  
////////////////////////////////////////////////////////////////////////////////// 	

//Initialize the PF9 and PF10 outlet. and to enable these two clocks    
//LED class IO
void LED_Init(void)
{
	GPIO_InitTypeDef GPIO_InitStructure;
	
	// Board Run LED
	RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOE, ENABLE); 		// GPIOE clock
	
	GPIO_InitStructure.GPIO_Pin		= GPIO_Pin_1;								// Board Run LED
	GPIO_InitStructure.GPIO_Mode	= GPIO_Mode_OUT;						// Output
	GPIO_InitStructure.GPIO_OType	= GPIO_OType_PP;  					// Push-pull output
	GPIO_InitStructure.GPIO_PuPd	= GPIO_PuPd_NOPULL;  				// Pull the output
	GPIO_InitStructure.GPIO_Speed	= GPIO_Speed_100MHz; 				// High-speed GPIO
	GPIO_Init(GPIOE, &GPIO_InitStructure);
	
	// RUN, ALM, SOC 0 ~ 3 LED
	RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOE, ENABLE); 		// GPIOE clock
	
	GPIO_InitStructure.GPIO_Pin		= GPIO_Pin_7								// ALM LED
																| GPIO_Pin_8								// RUN LED
																| GPIO_Pin_9								// SOC 3 LED
																| GPIO_Pin_10								// SOC 2 LED
																| GPIO_Pin_11								// SOC 1 LED
																| GPIO_Pin_12								// SOC 0 LED
																;								// Board Run LED
	GPIO_InitStructure.GPIO_Mode	= GPIO_Mode_OUT;						// Output
	GPIO_InitStructure.GPIO_OType	= GPIO_OType_PP;  					// Push-pull output
	GPIO_InitStructure.GPIO_PuPd	= GPIO_PuPd_NOPULL;  				// Pull the output
	GPIO_InitStructure.GPIO_Speed	= GPIO_Speed_100MHz; 				// High-speed GPIO
	GPIO_Init(GPIOE, &GPIO_InitStructure);
	
	GPIO_SetBits(GPIOE, GPIO_Pin_1); 													// BOARD RUN LED ON
	GPIO_SetBits(GPIOE, GPIO_Pin_7); 													// ALM LED ON
	GPIO_SetBits(GPIOE, GPIO_Pin_8); 													// RUN LED ON
	GPIO_SetBits(GPIOE, GPIO_Pin_9); 													// SOC 3 LED ON
	GPIO_SetBits(GPIOE, GPIO_Pin_10); 												// SOC 2 LED ON
	GPIO_SetBits(GPIOE, GPIO_Pin_11); 												// SOC 1 LED ON
	GPIO_SetBits(GPIOE, GPIO_Pin_12); 												// SOC 0 LED ON
}