#include "buzzer.h"
//////////////////////////////////////////////////////////////////////////////////	 
//This program is for educational purposes only, without the author's permission, may not be used for any other purpose
//ALIENTEK STM32F407 Development Board
//Buzzer driver code	   
//Hot Atomic @ALIENTEK
//Forum: www.openedv.com
//Date created: 2014/6/10
//Version: V1.0
//All rights reserved pirated reserved.
//Copyright(C) Guangzhou wing electronic technology limited company 2014-2024
//All rights reserved									  
////////////////////////////////////////////////////////////////////////////////// 	

//Initialize the PE2 outlet. and to enable these two clocks    
//Buzzer class IO
void Buzzer_Init(void)
{
	GPIO_InitTypeDef GPIO_InitStructure;
	
	RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOE,ENABLE); 		// GPIOE clock
	
	GPIO_InitStructure.GPIO_Pin		= GPIO_Pin_5;
	GPIO_InitStructure.GPIO_Mode	= GPIO_Mode_OUT;					// Output
	GPIO_InitStructure.GPIO_OType	= GPIO_OType_PP;  				// Push-pull output
	GPIO_InitStructure.GPIO_PuPd	= GPIO_PuPd_NOPULL;  			// Pull the output
	GPIO_InitStructure.GPIO_Speed	= GPIO_Speed_100MHz; 			// High-speed GPIO
	GPIO_Init(GPIOE, &GPIO_InitStructure);
	
	GPIO_ResetBits(GPIOE, GPIO_Pin_2); 											// GPIOE line
}