feat: KT mBMS 펌웨어 3종(HW1/2/3) 및 통합 빌드 환경 초기 커밋 (V4.0.0.1)

mBMS_APP_V3117/HARDWARE/led.c

@@ -0,0 +1,54 @@
+#include "led.h"
+//////////////////////////////////////////////////////////////////////////////////	 
+//This program is for educational purposes only, without the author's permission, may not be used for any other purpose
+//ALIENTEK STM32F407 Development Board
+//LED driver code	   
+//Hot Atomic @ALIENTEK
+//Forum: www.openedv.com
+//Date created: 2014/6/10
+//Version: V1.0
+//All rights reserved pirated reserved.
+//Copyright(C) Guangzhou wing electronic technology limited company 2014-2024
+//All rights reserved									  
+////////////////////////////////////////////////////////////////////////////////// 	
+
+//Initialize the PF9 and PF10 outlet. and to enable these two clocks    
+//LED class IO
+void LED_Init(void)
+{
+	GPIO_InitTypeDef GPIO_InitStructure;
+	
+	// Board Run LED
+	RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOE, ENABLE); 		// GPIOE clock
+	
+	GPIO_InitStructure.GPIO_Pin		= GPIO_Pin_1;								// Board Run LED
+	GPIO_InitStructure.GPIO_Mode	= GPIO_Mode_OUT;						// Output
+	GPIO_InitStructure.GPIO_OType	= GPIO_OType_PP;  					// Push-pull output
+	GPIO_InitStructure.GPIO_PuPd	= GPIO_PuPd_NOPULL;  				// Pull the output
+	GPIO_InitStructure.GPIO_Speed	= GPIO_Speed_100MHz; 				// High-speed GPIO
+	GPIO_Init(GPIOE, &GPIO_InitStructure);
+	
+	// RUN, ALM, SOC 0 ~ 3 LED
+	RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOE, ENABLE); 		// GPIOE clock
+	
+	GPIO_InitStructure.GPIO_Pin		= GPIO_Pin_7								// ALM LED
+																| GPIO_Pin_8								// RUN LED
+																| GPIO_Pin_9								// SOC 3 LED
+																| GPIO_Pin_10								// SOC 2 LED
+																| GPIO_Pin_11								// SOC 1 LED
+																| GPIO_Pin_12								// SOC 0 LED
+																;								// Board Run LED
+	GPIO_InitStructure.GPIO_Mode	= GPIO_Mode_OUT;						// Output
+	GPIO_InitStructure.GPIO_OType	= GPIO_OType_PP;  					// Push-pull output
+	GPIO_InitStructure.GPIO_PuPd	= GPIO_PuPd_NOPULL;  				// Pull the output
+	GPIO_InitStructure.GPIO_Speed	= GPIO_Speed_100MHz; 				// High-speed GPIO
+	GPIO_Init(GPIOE, &GPIO_InitStructure);
+	
+	GPIO_SetBits(GPIOE, GPIO_Pin_1); 													// BOARD RUN LED ON
+	GPIO_SetBits(GPIOE, GPIO_Pin_7); 													// ALM LED ON
+	GPIO_SetBits(GPIOE, GPIO_Pin_8); 													// RUN LED ON
+	GPIO_SetBits(GPIOE, GPIO_Pin_9); 													// SOC 3 LED ON
+	GPIO_SetBits(GPIOE, GPIO_Pin_10); 												// SOC 2 LED ON
+	GPIO_SetBits(GPIOE, GPIO_Pin_11); 												// SOC 1 LED ON
+	GPIO_SetBits(GPIOE, GPIO_Pin_12); 												// SOC 0 LED ON
+}