feat: KT mBMS 펌웨어 3종(HW1/2/3) 및 통합 빌드 환경 초기 커밋 (V4.0.0.1)

mBMS_APP_V3117/HARDWARE/dev_addr.c

@@ -0,0 +1,53 @@
+#include "dev_addr.h"
+//////////////////////////////////////////////////////////////////////////////////	 
+//This program is for educational purposes only, without the author's permission, may not be used for any other purpose
+//ALIENTEK STM32F407 Development Board
+//RELAY driver code	   
+//Hot Atomic @ALIENTEK
+//Forum: www.openedv.com
+//Date created: 2014/6/10
+//Version: V1.0
+//All rights reserved pirated reserved.
+//Copyright(C) Guangzhou wing electronic technology limited company 2014-2024
+//All rights reserved									  
+////////////////////////////////////////////////////////////////////////////////// 	
+
+//Relay IO Initialize
+void DevAddrInit(void)
+{
+	GPIO_InitTypeDef GPIO_InitStructure;
+	
+	// Device addr configuration - Charge Relay
+	RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOB, ENABLE); 	// GPIOB clock
+	
+	GPIO_InitStructure.GPIO_Pin		= GPIO_Pin_10;						// ADDR 0
+	GPIO_InitStructure.GPIO_Mode	= GPIO_Mode_IN;						// input
+	GPIO_InitStructure.GPIO_PuPd	= GPIO_PuPd_UP;  					// Pull Up
+	GPIO_InitStructure.GPIO_Speed	= GPIO_Speed_50MHz; 			// High-speed GPIO
+	GPIO_Init(GPIOB, &GPIO_InitStructure);
+	
+	// Relay output configuration - Discharge Relay
+	RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOE, ENABLE); 	// GPIOD clock
+	
+	GPIO_InitStructure.GPIO_Pin		= GPIO_Pin_15							// ADDR 1
+																| GPIO_Pin_14							// ADDR 2
+																| GPIO_Pin_13							// ADDR 3
+																;
+	GPIO_InitStructure.GPIO_Mode	= GPIO_Mode_IN;						// input
+	GPIO_InitStructure.GPIO_PuPd	= GPIO_PuPd_UP;  					// Pull Up
+	GPIO_InitStructure.GPIO_Speed	= GPIO_Speed_50MHz; 			// High-speed GPIO
+	GPIO_Init(GPIOE, &GPIO_InitStructure);
+}
+
+u8 GetDevAddr(void)
+{
+	u8 result = 0;
+	
+	result |= (!GPIO_ReadInputDataBit(GPIOB, GPIO_Pin_10) << 3);
+	result |= (!GPIO_ReadInputDataBit(GPIOE, GPIO_Pin_15) << 2);
+	result |= (!GPIO_ReadInputDataBit(GPIOE, GPIO_Pin_14) << 1);
+	result |= (!GPIO_ReadInputDataBit(GPIOE, GPIO_Pin_13) << 0);
+
+	return result;
+}
+